Car PC project(August 2013 update)

This is an update for my CarPC project.
You can download the latest image from here (username:'pi', password:'a')
The main features are:
Hardware:
Software:
[Operating System]
    - Raspbian Wheezy 9.February.2013
    - Custom kernel 3.6.11
        - eGalax touch screen module
        - si470x usb radio module
        - snd-usb-audio module

[Media Center]
    - omxplayer
    - XBMC 12.2 Frodo
        - media formats supported:  listed here
        - sources with objects build on 27.July.2013
        - skin: CarPC-touch(download current version)
            - system shutdown button(safely stop xbmc and safely halt)
            - reload skin button
            - switch to camera view button
        - modified spectrum analyzer(OpenGL with no rotation)
        - eGalax touch screen calibrated
        - eGalax touch screen click&drag fix
        - black rectangle behind XBMC removed
        - patch to add getMousePosition feature to xbmcgui module(used to redirect clicks from the Navigation skin page to X11 using xdotool)

[Navigation]
    - Navit build from source
    - Zoom In, Zoom Out buttons
    - Click sent from XBMC to X11 (Navit Window)

GPS Setup
1. Connect GPS module to UART TX, UART RX, GND and 3.3V or on a usb port.
2. If you are using an UART GPS module, as I did, use this tutorial or any other to setup UART communication.
3. Connect GPS to gpsd:
sudo apt-get install gpsd
gpsd /dev/ttyAMA0

Adding maps to Navit
In order to add new maps to Navit, there is a simple process. First, go to Navit Planet Extractor and download your desired area file(this will be a .bin file).
After this, transfer the file to your Raspberry PI in the folder /home/pi/navit_export/build/navit/maps/. Here, you should also update the existing .xml file and add another entry for your new map. My .xml file is looking like this:
<map type="binfile" data="$NAVIT_SHAREDIR/maps/osm_bbox_11.3,47.9,11.7,48.2.bin" />
<map type="binfile" data="$NAVIT_SHAREDIR/maps/osm_bbox_20.3,43.5,29.9,48.4.bin" />
You can rename your .bin files for easier management

Car Modding
I had to relocate my original Radio/CD player in the trunk and keep it set on aux input source. This included buying about 60m of wires and also harness:
1. Metra 71-9003 Bmw Mini Factory Radio OEM Wire Harness
2. Scosche VW03B 2002+ Vw Audi BMW Radio Stereo Harness

 front without OEM Radio/CD player
trunk with relocated OEM Radio/CD player
Mounted Raspberry PI in the armrest
Safety:
    - The wires are 2mm in diameter with good insulation, resistant at temperature variations
    - I have added fuses(1.5A for the radio, 1A for Raspberry PI, 1A for display, 0.1A for reverse camera trigger, 0.1A for reverse camera video signal)

Bugs:
     - sound pops(will soon disappear by using this hdmi to hdmi and audio splitter)
    - Navigation is behind Video Player -> Navigation isn't visible while playing videos(this isn't a big issue)
Posted by